EHB160-40x10, 40x20

Keywords:

EHB160-40x10, 40x20

Category:

EHB Bevel Gear Screw Jack

Asia, America,

Africa , Australia

Europe, America,
Africa, Oceania

Phone

Wechat

L13311099286

0086-13691276470

export@lim-tec.com

vera.zha@lim-tec.com

Screw Jack and Linear Actuator 2026.pdf

3D Model Download

Consultation

Description

EHB Bevel Gear Screw Jack

A mature and reliable technical solution will ensure the safety of your equipment.

Lim-Tec Bevel Gear Screw Jack

Lim-Tec Company provides complete lift system design solutions and a full range of system components.

The system components include: a screw jack, a geared motor, an electric motor, a reversing device, a drive shaft, a coupling, a brake, and a clutch, among others.

As long as the customer provides specific technical requirements—such as total load thrust, speed, stroke, and dimensional constraints—Lim-Tec engineers will deliver a detailed calculation process, system component selection, and a CAD assembly drawing.

Bevel Gear Screw Jack Elevator Parameters

Parameter	EHB065		EHB095		EHB140		EHB160		EHB210		EHB250		EHB300
Max lifting load kN	2.5	2.5	15	8	20	15	42	20	53	53	71	85	145
Rated dynamic load kN	6	11	17	29	48	19	54	39	60	71	80	85	361
Rated static load kN	13	25	49	73	122	54	155	107	196	226	317	275	1118
Screw dia x pitch mm	12x5 （Travelling Screw）	15x5 (Travelling Nut)	25x5	25x10	32x10	32x20	40x10	40x20	50x10	50x20	63x10	63x20	80x20
Bevel gear ratio	1: 2	1: 2	1: 2	1: 2	1: 2	1: 2	1: 2	1: 2	1: 2	1: 2	1: 2	1: 2	1: 2
Stroke for one input turn mm	2.5	2.5	2.5	5	5	10	5	10	5	10	5	10	10
Max input power kw	0.25	0.25	1.2	1.2	2.5	2.5	3	3	5.5	5.5	7.5	7.5	11
Max starting torque at full load Nm	1.6	1.6	9.0	9.0	30.0	30.0	50	50	110	110	150	150	310
Efficiency	0.72	0.72	0.7	0.72	0.7	0.7	0.7	0.72	0.7	0.72	0.7	0.72	0.7
Housing material	Spheroidal graphite iron（Stainless steel SS316 is also available）
Weight kg	2.5	2.5	6.5	6.5	25	25	37	37	85	85	143	143	247
Weight per 100mm screw &protective tube kg	0.25	0.25	0.58	0.58	0.8	0.8	1.6	1.6	2.5	2.5	3.2	3.2	4.6

Note:
Ambient temperature for all product：－20℃－＋40℃（Please contact us if －40℃－＋70℃ is needed）
Within 0-500mm stroke, the positioning accuracy of the bevel gear jack is 0.05mm, the repetable accuracy is 0.03mm, and the closed-loop accuracy is higher.
Ball screw bevel gear screw jacks, can work continuously in S1 duty circle.

Bevel Gear Screw Jack Parameter Table

n1=input speed Nm=input torque required kW=input power required

EHB160-40x10		Lifting Load
EHB160-40x10		42kN		35kN		25kN		10kN
n1	Increase speed mm/s	Reduction ratio 1:2
RPM	Increase speed mm/s	Nm	kW	Nm	kW	Nm	kW	Nm	kW
1500	125.00	47.750	7.500	39.792	6.250	28.423	4.464	11.369	1.786
1000	83.33	47.750	5.000	39.792	4.167	28.423	2.976	11.369	1.190
750	62.50	47.750	3.750	39.792	3.125	28.423	2.232	11.369	0.893
500	41.67	47.750	2.500	39.792	2.083	28.423	1.488	11.369	0.595
300	25.00	47.750	1.500	39.792	1.250	28.423	0.893	11.369	0.357
100	8.33	47.750	0.500	39.792	0.417	28.423	0.298	11.369	0.119
50	4.17	47.750	0.250	39.792	0.208	28.423	0.149	11.369	0.060

EHB160-40x20		Lifting Load
EHB160-40x20		20kN		15kN		10kN		5kN
n1	Increase speed mm/s	Reduction ratio 1:2
RPM	Increase speed mm/s	Nm	kW	Nm	kW	Nm	kW	Nm	kW
1500	250.00	44.213	6.944	33.160	5.208	22.106	3.472	11.053	1.736
1000	166.67	44.213	4.630	33.160	3.472	22.106	2.315	11.053	1.157
750	125.00	44.213	3.472	33.160	2.604	22.106	1.736	11.053	0.868
500	83.33	44.213	2.315	33.160	1.736	22.106	1.157	11.053	0.579
300	50.00	44.213	1.389	33.160	1.042	22.106	0.694	11.053	0.347
100	16.67	44.213	0.463	33.160	0.347	22.106	0.231	11.053	0.116
50	8.33	44.213	0.231	33.160	0.174	22.106	0.116	11.053	0.058

Note: In the table, green‑shaded areas indicate that the selected model has exceeded its maximum allowable input power or maximum lifting capacity. If such a model is chosen, please reduce the duty cycle accordingly. For detailed selection guidance, please consult your local sales office.