Product
EMB35
Keywords:
EMB35
Category:
Asia, America,
Africa , Australia
Europe, America,
Africa, Oceania
L13311099286
0086-13691276470
Description
Lim-Tec EMB Series Econmical Servo Actuator
Silent design, maintenance-free

Miniature electric actuators with a load range of 5kg to 1500kg. Compact design, 30% smaller in size compared to similar products. All components are modularly assembled, standardized and cost-effective. Rolled ball screw, high efficiency, high speed. Equipped with economical stepper servo motor and integrated driver,compatible with bus systems like CAN, EtherCAT, etc. The built-in program is a perfect replacement for small linear mechanisms such as pneumatic cylinders and other small linear mechanisms. Silent design, maintenance-free.
EMB Series Performance table
| Product Series | EMB05 | EMB10 | EMB20 | EMB30 | EMB35 | ||||
|---|---|---|---|---|---|---|---|---|---|
Lead of the ball screw, mm | 2 | 4 | 5 | 10 | 5 | 10 | 25 | 10 | 20 |
Rated thrust kN | 0.35 | 1 | 5 | 4.8 | 8.5 | 13 | 8.7 | 15 | 10 |
Maximum speed mm/s | 150 | 266 | 250 | 500 | 166 | 332 | 830 | 417 | 833 |
Rated thrust screw input torque Nm | 0.17 | 1.00 | 6.22 | 11.94 | 9.4 | 28.75 | 48.89 | 37.2 | 49.7 |
Rated dynamic load of ball screw, kN | 4 | 5 | 10.5 | 12 | 17 | 28 | 16.5 | 36.8 | 19 |
Maximum stroke mm | 300 | 300 | 500 | 800 | 1000 | ||||
Maximum input speed of the lead screw, rpm | 4500 | 4000 | 3000 | 2750 | 2500 | ||||
Maximum acceleration m/s² | 6 | 3 | 3 | 6 | 3 | 6 | 10 | 6 | 8 |
Cylinder block weight (without motor) kg | 1.22 | 1.35 | 6.9 | 15.3 | 23.7 | ||||
Weight per 100 mm of stroke, kg | 0.36 | 0.47 | 0.54 | 1.3 | 2.1 | ||||
Maximum free‑rotating angle of the power tube, ° | ±0.3 | ±0.3 | ±0.3 | ±0.3 | ±0.25 | ||||
Axial clearance mm | 0.04 | 0.05 | 0.05 | 0.05 | 0.05 | ||||
300 mm lead error mm | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | ||||
Repeatability mm | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | ||||
EMB Series Inertia Specification:
Model | EMB05 | EMB10 | EMB20 | EMB30 | EMB35 | |||||
Lead mm | 2 | 4 | 5 | 10 | 5 | 10 | 25 | 10 | 20 | |
Base Actuator-only input shaft | 0.019 | 0.052 | 0.5 | 0.51 | 1.85 | 1.99 | 2.13 | 7.08 | 7.32 | |
Inline actuator-with coupling | 0.025 | 0.112 | 0.975 | 0.985 | 2.75 | 2.85 | 3.03 | 9.2 | 9.44 | |
Inertia increase by each 100mm | Base Actuator/Inline actuator | 0.008 | 0.016 | 0.056 | 0.31 | 0.3 | 0.31 | 0.35 | 0.83 | 0.89 |
Timing-belt mounting Inertia (Default motor: with key) |
| |||||||||
1:1ratio timing-belt housing(*64mm) | 0.033 | 0.214 | - | - | - | - | - | - | - | |
1:1ratio timing-belt housing(*64mm) | - | - | 2.22 | 2.23 |
|
|
|
|
| |
1:1ratio timing-belt housing(*150mm) | - | - | - |
| 15.65 | 15.79 | 15.93 | 49.83 | 50.07 | |
1:1ratio timing-belt housing(*170mm) | - | - | - | - | - | - | - | 65.1 | 65.34 | |
1:1ratio timing-belt housing(*106mm) |
|
| 0.535 | 0.5375 |
|
|
|
|
| |
1:1ratio timing-belt housing(*150mm) |
|
|
|
| 3.7875 | 3.8225 | 3.8575 | 11.295 | 13.855 | |
1:1ratio timing-belt housing(*170mm) |
|
|
|
|
|
|
| 51.12 | 51.18 | |
Inertia increase | 1:1ratio timing-belt housing(*64mm) | 0.008 | 0.016 | - | - | - | - | - | - | - |
1:1ratio timing-belt housing(*106mm) | - | - | 0.052 | 0.056 | - | - | - | - | - | |
1:1ratio timing-belt housing(*150mm) | - | - | - | - | 0.3 | 0.31 | 0.35 | 0.83 | 0.89 | |
1:1ratio timing-belt housing(*170mm) | - | - | - | - | - | - | - | 0.83 | 0.89 | |
1:1ratio timing-belt housing(*106mm) |
|
| 0.013 | 0.014 |
|
|
|
|
| |
1:1ratio timing-belt housing(*150mm) |
|
|
|
| 0.075 | 0.0775 | 0.0875 | 0.2075 | 0.2225 | |
1:1ratio timing-belt housing(*170mm) |
|
|
|
|
|
|
| 0.2075 | 0.2225 | |
EMB30 Performance Specification
Model number | Lead distance mm | Deceleration mode | Planetary reduction Speed ratio | Servo motor Rated speed At 1500 rpm Extension speed mm/s | Actual load of the servo cylinder, N | Servo electric cylinder Maximum speed mm/s | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8500 | 6000 | 4000 | 2000 | 1000 | |||||||||||
Servo motor Power kW | Driving torque Nm | Servo motor Power kW | Driving torque Nm | Servo motor Power kW | Driving torque Nm | Servo motor Power kW | Driving torque Nm | Servo motor Power kW | Driving torque Nm | ||||||
EMB30-05 | 5 | Parallel synchronous belt 1:1 | None | 125 | 1.661 | 10.574 | 1.172 | 7.464 | 0.782 | 4.976 | 0.391 | 2.488 | 0.195 | 1.244 | 166 |
1:3 | 42 | 0.583 | 3.710 | 0.411 | 2.619 | 0.274 | 1.746 | 0.137 | 0.873 | 0.069 | 0.437 | 166 | |||
1:5 | 25 | 0.350 | 2.226 | 0.247 | 1.571 | 0.165 | 1.048 | 0.082 | 0.524 | 0.041 | 0.262 | 166 | |||
1:10 | 13 | 0.175 | 1.113 | 0.123 | 0.786 | 0.082 | 0.524 | 0.041 | 0.262 | 0.021 | 0.131 | 166 | |||
1:20 | 6 | 0.092 | 0.587 | 0.065 | 0.415 | 0.043 | 0.276 | 0.022 | 0.138 | 0.011 | 0.069 | 166 | |||
1:50 | 3 | 0.037 | 0.235 | 0.026 | 0.166 | 0.017 | 0.111 | 0.009 | 0.055 | 0.004 | 0.028 | 166 | |||
Parallel synchronous belt 2:1 | None | 63 | 0.830 | 5.287 | 0.586 | 3.732 | 0.391 | 2.488 | 0.195 | 1.244 | 0.098 | 0.622 | 166 | ||
Coaxial coupling 1:1 | None | 125 | 1.476 | 9.399 | 1.042 | 6.635 | 0.695 | 4.423 | 0.347 | 2.212 | 0.174 | 1.106 | 166 | ||
1:3 | 42 | 0.518 | 3.298 | 0.366 | 2.328 | 0.244 | 1.552 | 0.122 | 0.776 | 0.061 | 0.388 | 166 | |||
1:5 | 25 | 0.311 | 1.979 | 0.219 | 1.397 | 0.146 | 0.931 | 0.073 | 0.466 | 0.037 | 0.233 | 166 | |||
1:10 | 13 | 0.155 | 0.989 | 0.110 | 0.698 | 0.073 | 0.466 | 0.037 | 0.233 | 0.018 | 0.116 | 166 | |||
1:20 | 6 | 0.082 | 0.522 | 0.058 | 0.369 | 0.039 | 0.246 | 0.019 | 0.123 | 0.010 | 0.061 | 166 | |||
1:50 | 3 | 0.033 | 0.209 | 0.023 | 0.147 | 0.015 | 0.098 | 0.008 | 0.049 | 0.004 | 0.025 | 166 | |||
Model number | Lead distance mm | Deceleration mode | Planetary reduction Speed ratio | Servo motor Rated speed At 1500 rpm Extension speed mm/s | Actual load of the servo cylinder, N | Servo electric cylinder Maximum speed mm/s | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
15000 | 12500 | 8000 | 5000 | 2500 | |||||||||||
Servo motor Power kW | Driving torque Nm | Servo motor Power kW | Driving torque Nm | Servo motor Power kW | Driving torque Nm | Servo motor Power kW | Driving torque Nm | Servo motor Power kW | Driving torque Nm | ||||||
EMB35-10 | 10 | Parallel synchronous belt 1:1 | None | 250 | 5.862 | 37.321 | 4.885 | 31.101 | 3.126 | 19.904 | 1.954 | 12.440 | 0.977 | 6.220 | 417 |
1:3 | 83 | 2.057 | 13.095 | 1.714 | 10.913 | 1.097 | 6.984 | 0.686 | 4.365 | 0.343 | 2.183 | 417 | |||
1:5 | 50 | 1.234 | 7.857 | 1.028 | 6.548 | 0.658 | 4.190 | 0.411 | 2.619 | 0.206 | 1.310 | 417 | |||
1:10 | 25 | 0.617 | 3.929 | 0.514 | 3.274 | 0.329 | 2.095 | 0.206 | 1.310 | 0.103 | 0.655 | 417 | |||
1:20 | 13 | 0.326 | 2.073 | 0.271 | 1.728 | 0.174 | 1.106 | 0.109 | 0.691 | 0.054 | 0.346 | 417 | |||
1:50 | 5 | 0.130 | 0.829 | 0.109 | 0.691 | 0.069 | 0.442 | 0.043 | 0.276 | 0.022 | 0.138 | 417 | |||
Parallel synchronous belt 2:1 | None | 125 | 2.931 | 18.660 | 2.442 | 15.550 | 1.563 | 9.952 | 0.977 | 6.220 | 0.488 | 3.110 | 417 | ||
Coaxial coupling 1:1 | None | 250 | 5.211 | 33.174 | 4.342 | 27.645 | 2.779 | 17.693 | 1.737 | 11.058 | 0.868 | 5.529 | 417 | ||
1:3 | 83 | 1.828 | 11.640 | 1.524 | 9.700 | 0.975 | 6.208 | 0.609 | 3.880 | 0.305 | 1.940 | 417 | |||
1:5 | 50 | 1.097 | 6.984 | 0.914 | 5.820 | 0.585 | 3.725 | 0.366 | 2.328 | 0.183 | 1.164 | 417 | |||
1:10 | 25 | 0.548 | 3.492 | 0.457 | 2.910 | 0.293 | 1.862 | 0.183 | 1.164 | 0.091 | 0.582 | 417 | |||
1:20 | 13 | 0.289 | 1.843 | 0.241 | 1.536 | 0.154 | 0.983 | 0.096 | 0.614 | 0.048 | 0.307 | 417 | |||
1:50 | 5 | 0.116 | 0.737 | 0.096 | 0.614 | 0.062 | 0.393 | 0.039 | 0.246 | 0.019 | 0.123 | 417 | |||
|
|
|
|
| 10000 | 8000 | 4000 | 2000 | 500 |
| |||||
EMB35-20 | 20 | Parallel synchronous belt 1:1 | None | 500 | 7.816 | 49.761 | 6.253 | 39.809 | 3.126 | 19.904 | 1.563 | 9.952 | 0.391 | 2.488 | 833 |
1:3 | 167 | 2.742 | 17.460 | 2.194 | 13.968 | 1.097 | 6.984 | 0.548 | 3.492 | 0.137 | 0.873 | 833 | |||
1:5 | 100 | 1.645 | 10.476 | 1.316 | 8.381 | 0.658 | 4.190 | 0.329 | 2.095 | 0.082 | 0.524 | 833 | |||
1:10 | 50 | 0.823 | 5.238 | 0.658 | 4.190 | 0.329 | 2.095 | 0.165 | 1.048 | 0.041 | 0.262 | 833 | |||
1:20 | 25 | 0.434 | 2.765 | 0.347 | 2.212 | 0.174 | 1.106 | 0.087 | 0.553 | 0.022 | 0.138 | 833 | |||
1:50 | 10 | 0.174 | 1.106 | 0.139 | 0.885 | 0.069 | 0.442 | 0.035 | 0.221 | 0.009 | 0.055 | 833 | |||
Parallel synchronous belt 2:1 | None | 250 | 3.908 | 24.881 | 3.126 | 19.904 | 1.563 | 9.952 | 0.782 | 4.976 | 0.195 | 1.244 | 833 | ||
Coaxial coupling 1:1 | None | 500 | 6.947 | 44.232 | 5.558 | 35.386 | 2.779 | 17.693 | 1.389 | 8.846 | 0.347 | 2.212 | 833 | ||
1:3 | 167 | 2.438 | 15.520 | 1.950 | 12.416 | 0.975 | 6.208 | 0.488 | 3.104 | 0.122 | 0.776 | 833 | |||
1:5 | 100 | 1.463 | 9.312 | 1.170 | 7.450 | 0.585 | 3.725 | 0.293 | 1.862 | 0.073 | 0.466 | 833 | |||
1:10 | 50 | 0.731 | 4.656 | 0.585 | 3.725 | 0.293 | 1.862 | 0.146 | 0.931 | 0.037 | 0.233 | 833 | |||
1:20 | 25 | 0.386 | 2.457 | 0.309 | 1.966 | 0.154 | 0.983 | 0.077 | 0.491 | 0.019 | 0.123 | 833 | |||
1:50 | 10 | 0.154 | 0.983 | 0.124 | 0.786 | 0.062 | 0.393 | 0.031 | 0.197 | 0.008 | 0.049 | 833 | |||
EMB35 Overall Dimension:
Front Attachment

EMB35 Parallel dimension-P10,P20

The dimensions in above table are for reference only. The final dimensions may vary depending on the specific motor.
EMB35 Rear clevis mounting-RC

Note:*Dimensions will be 217mm when lead is 10mm; please consult Lim-Tec engineer when lead is 20mm
EMB35 Front flange mounting-FF

EMB35 Side flange mounting-SF

EMB35 Trunnion mounting-ST

EMB35 Inline dimension-SC

The dimensions in above table are for reference only. The final dimensions may vary depending on the specific motor.
Related Downloads
Related Products
Get a quote
We will contact you within one business day. Please check your email.